|
|
Accurate tabletting |
|
Compression in two stages |
|
Tabletting compartment separated from drive mechanism |
|
Mechanical compresssion system |
|
Easy maintenance & cleaning |
|
Meets GMP. |
|
| ................................................................................................................................... |
|
| HAVE PROVEN TO BE RELIABLE FOR: |
| Efficient large size production runs, withcapacity upto 169,000 tablet per hour. |
| |
| MACHINE DRIVE COMPLETELY SEPARATED FROM PRODUCTION AREA |
| Direct rotation of the turret by the main shaftreduces the noise level. The gearbox, with a casehardened nickel steel ground worm and bronze wormwheel (dia 500mm), it provides maximum protection to the gears and the drive system. |
|
 |
 |
| * Operator control panel is designed with controls and indicating devices to minimize operator attention. |
|
| ................................................................................................................................... |
|
| SAFETY DEVICE |
| Upper punch monitoring device is available that would switch off the machine in the event of punch tightness. |
|
| MECHANICAL FEEDER |
| The two chambers feeding system is driven from top by a variable speed motor. The unit can be easily assembled or disassembled for cleaning. |
| |
| PRE-COMPRESSION AND MAIN COMPRESSION |
| For successful high speed tablet production of difficult and direct compression material, the large diameter of pre-compression roll (196mm)increase punch dwell times and allows for difficult formulations to be processed at high speed without loss of tablet quality. |
|
| CLEANING AND TOOL CHANGEOVER |
| The detachable panels can be removed easily, to expose the entire lower punch cams, and simplify the removal of lower punches & dies. |
|
| UPPER & LOWER PUNCH SEALS |
| The scrapers seals for the upper punches protect tablets from oil dripping, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This features combined with an efficient dust extraction system allows prolonged run with minimum downtime for cleaning. |
|
| .................................................................................................................................. |
Specifications:
MODEL |
JC-SH-310 |
JC-SH- 39DB |
JC-SH- 39B |
JC-SH-47BB |
| Type of tooling |
IPT"D"
EU"D" |
IPT"D"
EU"D" |
IPT"B"
EU"B" |
IPT"BB"
EU"BB" |
| Number of station |
31 |
39 |
39 |
47 |
| Maximum Table diameter |
25.4mm
1" |
19mm(caplet)
(3/4") |
16mm
(5/8") |
13mm
(33/64") |
Production capactity
(tablets/hour) * |
27,900-111,600 |
35,100-140,000 |
42,300-169,000 |
Revolution of turret / Min
(60 cyc)* |
15-60 RPM |
| Depth of fill adjustable to |
19mm (3/4") |
17mm (43/64") |
| Maximum operating pressure |
10,000kgs (22,000lb) |
6,000kgs (13,200lb) |
| Maximum pre-pressure |
10,000kgs (22,000lb) |
6,000kgs (13,200lb) |
| Diameter of die |
38.1mm (1.5") |
30.16mm (1.1875") |
24mm(0.945") |
| Height of die |
23.81mm (0.9375") |
22.22mm (0.945") |
| Nominal diameter of punch body |
25.4 mm (1") |
19 mm(3/4") |
| Overall Length of upper Punch |
IPT 133.35 mm (5.25") or EU 133.6 mm |
| Overall Length of lower Punch |
IPT 133.35 mm (5.25") or EU 133.6 mm |
| Turret P.C.D |
490 mm |
| Power consumption |
5HP (3.7kw) |
| Machine dimensions |
900x1100x1750mm(H) (not including hopper) |
|
*Subjest to the characteristics of the power.
*The manufacturer reserves the right to modifty the design, specifiaction, etc., to improve
the performance of the machine without notice. All the specifiaction shown are reference only. |
|
